[SPROCKIT]

i have a 99 taco with the 5vz motor
(recent mods within the last 6 months)
custom intake
TRD supercharger
2.2" pulley
URD fuel system upgrade
inovative wide band 02
and a cold fusion nitrous system with a 100 shot

brendan down at psi racing in florida told me he ran 12 psi and a 125 shot on a stock 98 taco 4x4 v6 and ran 12.6

how much nitrous can the 5vz take ???

i been using nitrous for about 3 yrs on mine but never went over a 100 shot

opinions?????

 

[NVTACO]

does your nitrous kit retard the timing?

 

[SPROCKIT]

no but

 

[SPROCKIT]

no but ikeep an eye on things with the wide band

 

[SPROCKIT]

i run plugs that are two stages cooler and premium gas

 

[Jonathan]

no but ikeep an eye on things with the wide band

that has nothing to do with timming.

 

[SPROCKIT]

i know that

 

[tour4fun]

i have a 99 taco with the 5vz motor
(recent mods within the last 6 months)
custom intake
TRD supercharger
2.2" pulley
URD fuel system upgrade
inovative wide band 02
and a cold fusion nitrous system with a 100 shot

brendan down at psi racing in florida told me he ran 12 psi and a 125 shot on a stock 98 taco 4x4 v6 and ran 12.6

how much nitrous can the 5vz take ???

i been using nitrous for about 3 yrs on mine but never went over a 100 shot

opinions?????

I have a friend that runs 120 shot , I was in his taco on Friday.

 

[trdtoy]

Try a smaller s/c pulley and a 75 shot. The more air the s/c is forcing in for the n2o to cool off the more power that will be made. If you need a smaller s/c pulley let me know what diameter you need and I can sell you one at a reasonable price. I'm getting ready to make some along with some light crank pulleys. Good luck!

 

[Racer_X]

It's this guy trying to go 200mph in his truck!?!?! Why are you bothering with NOS... why not get yourself a Jet turbine and go that route?!

 

[SPROCKIT]

lol i just might , where can i buy a jet engine lol lol lol

ok well heres my question with the supercharger i have heard that the TRD superchargers are useless above 9 psi they just make heat i know if your spraying that cools the charge

with the 2.2 pully and the 100 shot by boost goes from 9.5 to about 14psi


YOU MAKE PULLEYS??

 

[SPROCKIT]

oh yeah im on my 4th boost guage

1 came with the kit the trd that only goes up to 10 psi read 9.5 most of the time and is useless when i use thr nitrous

the second was installed and read 5 psi

the third was installed and read 7psi and the needle would jump around alot it swasnt a smooth motion

the fourth (current) reads 9psi most of the time cause its half a pound low when the truck is off

 

[tour4fun]

oh yeah im on my 4th boost guage

1 came with the kit the trd that only goes up to 10 psi read 9.5 most of the time and is useless when i use thr nitrous

the second was installed and read 5 psi

the third was installed and read 7psi and the needle would jump around alot it swasnt a smooth motion

the fourth (current) reads 9psi most of the time cause its half a pound low when the truck is off

I use this one:
http://www.autometer.com/cat_gaugedetail.aspx?gid=2639&sid=7

 

[trdtoy]

sprokit: Ya I'm getting some s/c pulleys made..........you interrested in a certain size? And do as tour4fun told you and get an autometer gauge.....:waytogo: Thats what I'm usin....................

 

[SPROCKIT]

the one im using now is auto meter but its half a pound low is there a way to fix that?

 

[dropthattaco]

autometer is garbage. stewart warner may be a bit better, but i don't have first hand knowledge.

 

[SPROCKIT]

Sooo How Much Nitrous Have People Used In Their Tacos??

 

[dropthattaco]

i used to run a 50 shot, but i was a wuss

 

[SPROCKIT]

anyone run over 120?

 

[TJS TACO]

anyone run over 120?

I ran a 75 shot for a year, but i would be reluctant to run any more than 100 shot with a s/c, but what the hell go for it. Let us know how far it goes till it blows!:clapping: