Toyota Tacoma Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
6,006 Posts
Over the front license plate..think ima mount it on the passenger side of the bumper..:thinking:
wanna hide it inside the valence though..that would be cool.
Hopefully I'll have new wheels on by Monday.




and just for kicks..



 

Attachments

·
Registered
Joined
·
6,006 Posts
bubble central LOL
It's a ****ty material..I got it for free from Phillip:shrug:

Like it's this weird material..not very adhesive

and yeah I have new wheels..there sitting right next to me actually LOL
I gotta get tires dismounted off those and mounted on the new ones still...if you did some reading Ryan, you would know that;)
 

·
ADMlNAHATER
Joined
·
8,720 Posts
It's a ****ty material..I got it for free from Phillip:shrug:

Like it's this weird material..not very adhesive
I have one of his decals right in front of me that Voodoo sent me,
that clear section peels off, its transfer plastic you goober.. :evil:
 

·
Registered
Joined
·
6,006 Posts
yea dude it looks like you left the transfer sheet on top of the red decal.
it should come off,if not then i guess youre right.:lol:
There is nothin on top.


there was one when i first put it on...and it made the sticker like it was 3 mil thick..then i took it off and use a credit card and got the bubbles out..

but nothin else comes off:shrug:
 

·
ADMlNAHATER
Joined
·
8,720 Posts
trust me man, peel the foggy clear stuff off of it.. accept the fail.. :D

the clear really wants to stick to the decal, you have to fold it
over and pull away from the corner your pulling, thats the ticket :)

 

Attachments

·
Registered
Joined
·
6,006 Posts
I know what you mean..i've had die cut decals before..

but im telling you..this one will just not come off! it's a failure!

it was cheaply cut anyway..lines were off..I had to trim it..
and it's missing a part of the corner on the actual decal anyway.

it's a runt;)
 

·
ADMlNAHATER
Joined
·
8,720 Posts
I know what you mean..i've had die cut decals before..

but im telling you..this one will just not come off! it's a failure!

it was cheaply cut anyway..lines were off..I had to trim it..
and it's missing a part of the corner on the actual decal anyway.

it's a runt;)
it's installer error..
I see a corner of the clear on the upper right hand corner past the red..
its because he didn't leave enough excess clear past the decal is why this is suck a pain and seems like its a runted decal.. I've delt with this before..

It's far easier to save face and say that the decal is defective,
If I were you I'd stick to it because this is as FAIL as it gets.. :lol:

It took me about 5 minutes to seperate what I did for that picture,
that clear stuff really sticks hard..
 

·
Registered
Joined
·
405 Posts
It's a fail
You should really clean the surface of any grime or oil prior to applying decals.(which most of the time cant be seen) Especially on windshields. Sorry it didnt work out for you. And yes it looks rediculous with the transfer tape just chillin. Hit me up, I will send you a replacement of that or another design you might be interested in. :waytogo:
 
1 - 16 of 16 Posts
Top