Toyota Tacoma Forum banner

1181 - 1190 of 1190 Posts

·
Registered
Joined
·
184 Posts
5/6
Belltech lowering springs
Ball Joint flip
middle leaf removed on stock leaf pack
2" lowering blocks
1" bolt on lowering block on drivers side
Kyb Gas-a-justs
 

Attachments

·
Registered
Joined
·
184 Posts
What is the 1" block for?
my driver's side was 1" higher than the passenger side. so I used a bolt to leaf block from streetacos to level it out.
 

·
Registered
Joined
·
5 Posts
Thats what I thought but wanted to make sure. Any bump steer issues? Im planning on doing 5/5 drop on mine
Front: BJ flip + 2" belltech coils
Rear: 6lug leaf pack with second pulled + 2" block


Figuring I will have to notch the fame a bit, probably correct drive shaft angle, and find correct front shock height.

Any other issues I should prepare for?
 

·
Registered
Joined
·
1 Posts
Is this lifted or just leveled?

As of Now


Testing out a 32" in the front


It clears!

Notice the jack...yeah its the stock mini and it was broken from raising it too high after these pics. the jack was almost high enough to get to the frame.

im pissed. today i was supposed to go try on the rubicon rims and the shop never called me back.
 

·
Mambeau / Admin
Joined
·
47,700 Posts
1181 - 1190 of 1190 Posts
Top