Toyota Tacoma Forum banner

Question On DJM kit for 2001 tacoma

1681 Views 9 Replies 5 Participants Last post by  INACOMA
Hey everyone, i am a brand new member but love Tacomas. I bought a 2001 standard cab stepside and lowered it with the djm 3/4 kit. The back was no problem but the front was a pain. i installed the upper arms and assembled them correctly but my question is that it seems that the front of my truck hasn't dropped the full 3 inches. if anyone has any tips or helpful hints on what i could have done wrong please tell me. I appreciate any responses.

1 - 1 of 10 Posts's kindof a common thing..screwing up the tires. My alignment was off, but most of that was because one of my brake lines was pinched up front.

A word to the wise(those installing the DJM kit): Make sure you DOUBLE-check all of your brake lines before you let the truck down and drive it for the first time. I drove my truck home about 60 miles with both front brakes all screwed up. Totally scrapped all 4 factory tires. Oh well, it was a good excuse to get my 17s..yay!!!
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.