Toyota Tacoma Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
599 Posts
Get some 1/8" thick by 1" wide Aluminum bar stock. Cut to the proper width, drill and tap. Bolt it to the back side of the stock mounting point so the tweeter dosent hit the factory grille. If your tweter is shallower, try mounting it to the front of the stock bracket.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top