[tate1411]

Hey guys, I am slowly installing the infinity kappa 6.1 components that i bought for 100 bucks. I got the tacotunes adapter and am wondering how you all mounted the tweeters. I was thinking of just using the stock metal and ripping out the stock tweeters and go from there.

 

[CBRBob]

Get some 1/8" thick by 1" wide Aluminum bar stock. Cut to the proper width, drill and tap. Bolt it to the back side of the stock mounting point so the tweeter dosent hit the factory grille. If your tweter is shallower, try mounting it to the front of the stock bracket.

 

[Pb2theMax]

I made a tweeter baffle from 1/2" plywood and drilled holes to match the stock tweet bracket bolt holes. Then just mount the tweet to the baffle. You can also use steel plumbers tape to rig up a bracket.