Toyota Tacoma Forum banner

1 - 9 of 9 Posts

·
ADMlNAHATER
Joined
·
8,720 Posts
Discussion Starter #1
Does anyone have a stock 2wd mini spring thats not installed that they can take some measurments of how long it is and the diametor of it at the top and bottom, possibly even a few pictures.. :waytogo:

Im exploring the world of a potential coil over setup for the front.
An adjustable ride height with adjustable dampening is what i'm looking into..

So any help would be greatly appreciated..
thanks :cool:
 

·
Registered
Joined
·
14,487 Posts
Chris D. said:
Does anyone have a stock 2wd mini spring thats not installed that they can take some measurments of how long it is and the diametor of it at the top and bottom, possibly even a few pictures.. :waytogo:

Im exploring the world of a potential coil over setup for the front.
An adjustable ride height with adjustable dampening is what i'm looking into..

So any help would be greatly appreciated..
thanks :cool:
dont be stealin my ideas boy i might have to start making fun of your backwards truck again:lol:



Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
 

·
Registered
Joined
·
1,720 Posts
I just so happen to have a set next to my desk, lucky you... heee whooo

Rough measurements.

15.5 Free Length
2.75 ID / 4.0 OD
3.25 ID / 4.5 OD
.6 wire diameter
 

·
Registered
Joined
·
1,855 Posts
i thought downey and Dt already have coilover systems?
 

·
Registered
Joined
·
1,720 Posts
I think he's talking about installing something to lower and tune the handling characteristics of his truck... not just to slap a coilover on for the sake of saying he's running them... like the DT/Downey setups. :lol:
 

·
ADMlNAHATER
Joined
·
8,720 Posts
Discussion Starter #9
copieddemise said:
I just so happen to have a set next to my desk, lucky you... heee whooo

Rough measurements.

15.5 Free Length
2.75 ID / 4.0 OD
3.25 ID / 4.5 OD
.6 wire diameter
Im not completly clear on the...
2.75 ID / 4.0 OD
3.25 ID / 4.5 OD

the top measurment is the inside diametor and the bottom measurment is the outside of the spring?

Is the smaller ID the upper part of the spring as it sits as if it were installed on the truck?
The larger ID the bottom?

can you edit a picture and MS paint the measurments for me by any chance..
Im more of a visualist..
 
1 - 9 of 9 Posts
Top