[jw112]

(On a Base model 2005-06 2wd std cab 5 lug)

Does the truck already have keyless door Actuators from the factory?

How would i go about putting keyless entry on the truck?

 

[jw112]

bump

 

[jsutiz00]

I have not dont this but if I were to here is how.

Get:

2x http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=330-010&raid=55&rak=330-010
1 x http://www.partsexpress.com/pe/showdetl.cfm?Partnumber=330-078
2 x http://www.partsexpress.com/pe/showdetl.cfm?Partnumber=330-070
1 x http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=330-145
Wire the actuators like the bottom picture on page 15
http://www.partsexpress.com/pdf/500-001.pdf
Wire the control box according to the units instructions. Then enjoy.

 

[da_jokker]

Truly if your truck has power locks, the cheapest would be to get a basic alarm installed. You don't have to have the Viper $$$$ or whatever, but a basic alarm can be had for $100 and besides provide some protection for your truck, will lock/unlock the doors for you!