Select by category
Tech Articles
2wd Suspension Tech
1995.5-2004
2005+
4x4-Specific Tech
1995.5-2004
2005+
Exterior/Body Tech
1995.5-2004
2005+
Interior/Audio Tech
1995.5-2004
2005+
Maintenance Tech
1995.5-2004
2005+
Performance Tech
1995.5-2004
2005+
FAQs
2wd Suspension FAQs
1995.5-2004
2005+
4x4-Specific FAQs
1995.5-2004
2005+
Exterior/Body FAQs
1995.5-2004
2005+
Interior/Audio FAQs
1995.5-2004
2005+
Maintenenace FAQs
1995.5-2004
2005+
Performance FAQs
1995.5-2004
2005+
Wheel and Tire FAQs
TSBs
2005+
95.5-2004
Available Categories
A tree for site navigation will open here if you enable JavaScript in your browser.
Other Options
Search
Glossary
Export PDF
Main
>
Tech Articles
>
2wd Suspension Tech
2wd Suspension Tech
Sub Categories
1995.5-2004
(1)
2005+
(0)
Articles
Air Compressor Toggle Switch
Don't Let Your Compressor Drain Your Battery By: Randy Hobart For those of you with air suspension systems, I'm sure you have a compressor setup that includes a pressure sw
- 2003-09-08 -
Similar Articles
Do Your Own Quick-Alignment
By: Randy Hobart Chances are, you won't be able to get your truck lowered at an alignment shop... which makes it inevitable that you will have to drive your freshly lower
- 2003-09-12 -
Similar Articles
Don't Bust Your Knuckles. Tap It Out!
By: Randy Hobart When installing new upper control arms (either with the DJM kit or a 4wd kit), you must remove the mounting shafts from the control arms. This can be a
- 2003-09-03 -
Similar Articles
Don't Let Your Compressor Drain Your Battery
By: Randy Hobart For those of you with air suspension systems, I'm sure you have a compressor setup that includes a pressure switch. The pressure switch automatically tur
- 2003-09-03 -
Similar Articles
Got Bags? Make an Air Bag Fix-It Kit
By: Randy Hobart For those of you with air suspensions, there's always a paranoia of having broken or cut airlines or punctured airbags. Here's two simple tips that may e
- 2003-09-03 -
Similar Articles
Install Aftermarket Coil Springs
Author: pucancakes Step 1: Jack truck up and remove wheel. Use jackstands to support truck and make sure that they are secure. Step 2: Unbolt nut on top of the
- 2003-07-31 -
Similar Articles
Installing Shorter Stops
By: Jeff Pollard I have the DJM 3/4 drop on my 99' X-cab and frequently find my suspension bottoming out on the factory bump stops that I cut down to a smaller size. The
- 2003-07-31 -
Similar Articles
No Notch? Use Small Stops
By: Randy Hobart For those of you who want to go low, but refuse to cut a notch in the frame, I'm sure you suffer from a lot of loud bottoming-out in the rear. For one th
- 2003-09-03 -
Similar Articles
Suspension Torque Specifications (05+)
Below are the torque specifications for the front and rear suspension components on the 2005+ Tacomas, taken from the Toyota service manual:- Front Suspension Torque Specs- Re
- 2006-11-10 -
Similar Articles
Powered by
KnowledgeBuilder
© Copyright 2001-2008 CustomTacos.com.
CustomTacos.com
is privately owned and is in no way affiliated with Toyota Motor Corporation.