3 pillar pods...

CUSTOEM · 10-17-2005, 09:05 PM

Anyone have the tacos to be a project leader

--------------------------------------------------------------------------------

Group Projects

Attention car clubs and Internet forum groups. We can manufacture custom gauge holders for your vehicle. Prices starting at just $20 for single pods. Full-length pillars as low as $39.

Minimum order quantity is 30 per project. Some models may require a higher minimum. If both double and triple gauge holders are requested, this represents two projects and consequently, requires 30 pre-paid units each. All orders must be paid prior to project start. Pricing will be determined after receipt of OEM part for evaluation. Most of our products range from $40-$60 ea. Shipping charges and color matching is extra.

REQUIREMENTS:

Name, address, and contact information of project leader. Follow-up will be with project leader only. (Please do not have others call for status)

OEM part from project leader. This will be used for fabricating the mold and is non-returnable.

Make, model and year range specifications.

Color samples (at least 4"x4" sample) of all colors to be painted.

Gauge Size requested (usually 2 1/16" and/or 60mm). Note: some models may not accomodate 60mm gauges due to width limitations.

PRODUCTION SCHEDULE:

Rough mock-up will be made and sent to project leader. Project leader test-fits mock-up - checking for clearance problems and angle of gauges. Project leader returns the mockup with any modifications and approves the design.

Mold-making process - approx 4-5 weeks

Initial production run - approx 3-4 weeks

Finishing and shipping - approx 1 week after product availability.

*******IMPORTANT********

PRODUCTION SCHEDULING IS COMPLEX AND DELAYS ARE NOT UNCOMMON DUE TO THE NUMBER OF PROJECTS AHEAD OF YOURS, MATERIAL LEAD-TIME, ETC. WE DO OUR BEST TO PROVIDE A RESONABLE ESTIMATE OF DELIVERY TIMES - HOWEVER, WE CANNOT GAURANTEE A DELIVERY DATE.

email: Special_Projects@gaugepods.com

MountainBiker · 10-19-2005, 10:22 AM

Good luck getting 30 commited buyers!

Personally, I'd be more interested in getting a molded plastic steering column cover that holds two gauges. But I'll keep my eye on this thread.

biebs96 · 10-19-2005, 10:25 AM

i would be in cause i wanted a triple pillar pod, but i just bought a double pod about 2 months ago.

mannyfresh619 · 10-19-2005, 10:28 AM

i would get the 3 pillar pod just no $$$ till next week

ChrisTaco · 10-19-2005, 11:36 AM

Quote:

i would be in cause i wanted a triple pillar pod, but i just bought a double pod about 2 months ago.

Wanna sell the double pod then? What color is it 1st.

mannyfresh619 · 10-19-2005, 11:45 AM

does anyone know if the honda civic pillar pod fits our tacos( flushed?)
i want to get rid of my mustang pod and put the 3 pillar pod

ChrisTaco · 10-19-2005, 12:35 PM

From what threads I was looking through, Al (fabtaco) had/has a civic 2 pillar pod in his truck.

biebs96 · 10-19-2005, 01:56 PM

Quote:

i would be in cause i wanted a triple pillar pod, but i just bought a double pod about 2 months ago.

Wanna sell the double pod then? What color is it 1st.

i dont wanna sell it, im content with it for right now.
click the pic to go to the company where i purchased it website.

mannyfresh619 · 10-19-2005, 02:04 PM

Quote:

From what threads I was looking through, Al (fabtaco) had/has a civic 2 pillar pod in his truck.

and it's flushed

mannyfresh619 · 10-24-2005, 10:42 AM

[QUOTE]
Anyone have the tacos to be a project leader

--------------------------------------------------------------------------------

Group Projects

Attention car clubs and Internet forum groups. We can manufacture custom gauge holders for your vehicle. Prices starting at just $20 for single pods. Full-length pillars as low as $39.

Minimum order quantity is 30 per project. Some models may require a higher minimum. If both double and triple gauge holders are requested, this represents two projects and consequently, requires 30 pre-paid units each. All orders must be paid prior to project start. Pricing will be determined after receipt of OEM part for evaluation. Most of our products range from $40-$60 ea. Shipping charges and color matching is extra.

REQUIREMENTS:

Name, address, and contact information of project leader. Follow-up will be with project leader only. (Please do not have others call for status)

OEM part from project leader. This will be used for fabricating the mold and is non-returnable.

Make, model and year range specifications.

Color samples (at least 4"x4" sample) of all colors to be painted.

Gauge Size requested (usually 2 1/16" and/or 60mm). Note: some models may not accomodate 60mm gauges due to width limitations.

PRODUCTION SCHEDULE:

Rough mock-up will be made and sent to project leader. Project leader test-fits mock-up - checking for clearance problems and angle of gauges. Project leader returns the mockup with any modifications and approves the design.

Mold-making process - approx 4-5 weeks

Initial production run - approx 3-4 weeks

Finishing and shipping - approx 1 week after product availability.

*******IMPORTANT********

PRODUCTION SCHEDULING IS COMPLEX AND DELAYS ARE NOT UNCOMMON DUE TO THE NUMBER OF PROJECTS AHEAD OF YOURS, MATERIAL LEAD-TIME, ETC. WE DO OUR BEST TO PROVIDE A RESONABLE ESTIMATE OF DELIVERY TIMES - HOWEVER, WE CANNOT GAURANTEE A DELIVERY DATE.

email: Special_Projects@gaugepods.com [/quot

so hmm