Hey guys. I just lifted my '99 Tacoma, so I have all these components left over from when it was lowered. I wanted to get this ad out as a feeler and I will be posting prices and pictures within the next couple days. I have included a link with pictures of the truck as it sat with the lowering kit and rims on it.
Chassis Tech 3" lowering leaf springs. Bushings are shot.
DJM upper control arms for ball joint flip. Bushings still look good.
Hellwig rear sway bar with mounting hardware. End-link bushings are ok, but really cheap and easy to replace if you want.
16x7 Rota Torque, 5x114.3, +27mm offset. 225/55/16 Continental DWS tires in very good condition. The combo fits like a glove. When I took off the 18" wheels, I had a lot of trouble finding a decent set of 16" wheels that would fit right, without hitting the upper control arm or lower ball joint bolts.
Upper control arms and rear sway bar are still for sale. Upper control arms will come with a brand new set of bushings, washers, and the end link kit that is required for the front sway bar. Just ordered it all from DJM. Basically, you get the whole DJM front kit. The old soft parts were pretty worn, so I figured I would replace them to save the hassle for the next guy.
Upper control arms and rear sway bar are still for sale. Upper control arms will come with a brand new set of bushings, washers, and the end link kit that is required for the front sway bar. Just ordered it all from DJM. Basically, you get the whole DJM front kit. The old soft parts were pretty worn, so I figured I would replace them to save the hassle for the next guy.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.