2" Bio Spindles f/s

N2BNLO · 02-14-2011, 10:25 AM

I gotta buy some tires and get my compressor fixed so I am selling my Bio Spindles.

2" Bio-Kustoms Hand made drop spindles. In great shape with a good coat of Por-15 on them. Will include stock upper arms.(you will have to get these upper arms as I welded the brackets that bolt to the spindles to the arms. yes you can still unbolt the arms from the spindles just at the spindle, not at the arms) Will also include the lower ball joints. Max custom built these b/js for me and a couple others with high end show trucks. These ball joints have been cut, lowered and re-angled so that Toe is very minimal when laying a Tacoma out on a 20"+ wheel. If you have a bagged Tacoma laying on 20s you know what I am talking about. This setup layed my truck HARD on a 225-35-20 wheel and tire. With properly setup bag brackets it will lay yours out too.

I am asking $450 for this complete setup. I will need your stock spindles, upper and lower ball joints which all must be in good shape as well. FYI....I spent near $700 for this stuff.

I WILL BE GETTING PICS SOON. Keep in mind I will not be taking this stuff off of my truck until I have a for sure buyer as its not fun to dissable and I will need spindles to drive my truck.

PLEASE PM me with any questions and serious buyers only please. I may be a little negotiable with the price but not by a whole lot. again PM me and maybe we can work something out.

N2BNLO · 02-15-2011, 11:06 AM

$425 for spindles, upper arms and modified lower ball joints. This is quality stuff people.

N2BNLO · 02-16-2011, 12:20 PM

BUMPO

N2BNLO · 02-22-2011, 06:07 AM

Bumps

lower_case_j · 02-22-2011, 10:21 AM

Quote:

Originally Posted by N2BNLO

Bumps

good god that's a steal. and someone's student loan check just came in. it'd sit in the closet for a while until i saved up for bags and rims but damn, i will never come across a deal like that again.

shoot me an email - dbljzzl@gmail.com and if you can, a shipping quote to 77038. if i don't buy it someone will.

slownlow43 · 02-22-2011, 11:00 AM

Quote:

Originally Posted by lower_case_j

good god that's a steal. and someone's student loan check just came in. it'd sit in the closet for a while until i saved up for bags and rims but damn, i will never come across a deal like that again.

shoot me an email - dbljzzl@gmail.com and if you can, a shipping quote to 77038. if i don't buy it someone will.

You do realize he is gonna need your stock parts to replace his aftermarket, right?

If I can get my wheels sold off my daily you'll be getting a PM from me, assuming lower_case_j doesn't get this from you.

N2BNLO · 02-22-2011, 11:01 AM

PM and email sent.

N2BNLO · 02-22-2011, 11:05 AM

Quote:

Originally Posted by slownlow43

You do realize he is gonna need your stock parts to replace his aftermarket, right?

If I can get my wheels sold off my daily you'll be getting a PM from me, assuming lower_case_j doesn't get this from you.

Correct sir. And I will let you know what he decides.

I also want to point out that if you intend on using these lower ball joints you will need to have at least 18" wheels. Maybe even a 19" depending on the inside lip of the wheel. I am running them with 18s right now and it clears so i will just say you will need an 18". You can get stock ball joints though and be fine. These ball joints are specifically for guys laying hard on big wheels.

N2BNLO · 02-24-2011, 06:10 AM

Listing is now on Mautofied.com.

N2BNLO · 02-28-2011, 06:54 AM

And thread re-opened.

$400 for this stuff. I need tires.