Since im using a bumper valance combo that doesn't have any signal lights on the bumpers....I just used a 921 bulb to replace the 194 corners. Yes the 921 bulb has the same resistance as a 1156 bulb to use for signals without hyperflash. For parking lights i used a 194 socket drilled through behind the corners. It has a rubber grommet for water proofing. It works fine, .....
Corners are with 194 bulbs, and singals are with brighter 921 bulbs. 921 bulbs are actually the reverse light bulb i had lyin around. I'm usin 921 LEDs for reverse.
Last edited by Enola Gaia; 04-08-2013 at 08:22 PM.
Tacoma: 2000 Reg Cab 5-Speed Turbo, 1986 4Runner 22RE 4x4 on 35 inch Thornbirds, 2012 Toyota Camry
Re: Corners as signals and parking lights.
Originally Posted by Chris D.
Bumper/ valance doesn't look like its lined up too well as if its warped or forced to fit.
Rattle it to match the truck..
i wanna do the corner/turn signal mod as well...here lately i havent had time to do ANYTHING to the truck, last thing i did was check the oil on saturday, and it hasnt even been started since thursday afternoon...i am shameful of this...
i say rattle just the top part and keep the valence black...see if it looks slightly better
QA1's and BJ Flip up front, Drop leafs and beefed blocks out back, Celica Seats, decent sound system w/some 10's, W58 swap, 3.73 gears w/Detroit True Trac. Boost Brigade Since APR 2012, Member of the NO BOV Club!...CH-CH-Ch-Ch-ch-ch
Looks warped tho..
Low in the middle, then higher outwards then back down.
The intercoolers straight lines are what brought my attention to it, then you notice the rest.
I notice little shlt like that tho.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.