AZSCTACO
08-08-2006, 03:20 PM
Just in case people were looking for these.....apparently they are very hard to get. Anyways....here is a group buy from the other forum I am on. Tacomas both 4 and 6 cyl have the same oil filter as Lexus.
GROUP BUY CODE: 20004
$10.79 each with group buy code
http://www.l-tunedparts.com/product/?id=2217
______________________________________________
Toyota USA stopped importing one of the best oil filters Japan ( Denso) made for our vehicles, we have the very hard to get 90915-20004 Genuine Toyota filter in stock!
Easy to ship cases of QTY 10
Depth-type filter element, 65mm O.D., 31mm I.D., with a height of 72mm. The filter element is not of uniform thickness, but is grooved to increase its outside (entry) surface area. Not similar in construction to any other oil filter
Eight entry holes in base, thru which a red silicone rubber antidrainback (ADB) valve can be seen. Looking thru the outlet (the center hole), the center rivet and moving portion of the steel-on-steel by-pass valve can be seen at the far end.
Seating gasket is an O-ring with 70mm O.D., 64mm I.D. The O-ring is crimped in place.The steel housing is very strong, 0.019” thick.
GROUP BUY CODE: 20004
$10.79 each with group buy code
http://www.l-tunedparts.com/product/?id=2217
______________________________________________
Toyota USA stopped importing one of the best oil filters Japan ( Denso) made for our vehicles, we have the very hard to get 90915-20004 Genuine Toyota filter in stock!
Easy to ship cases of QTY 10
Depth-type filter element, 65mm O.D., 31mm I.D., with a height of 72mm. The filter element is not of uniform thickness, but is grooved to increase its outside (entry) surface area. Not similar in construction to any other oil filter
Eight entry holes in base, thru which a red silicone rubber antidrainback (ADB) valve can be seen. Looking thru the outlet (the center hole), the center rivet and moving portion of the steel-on-steel by-pass valve can be seen at the far end.
Seating gasket is an O-ring with 70mm O.D., 64mm I.D. The O-ring is crimped in place.The steel housing is very strong, 0.019” thick.