LONG LIST OF THINGS THAT HAVE TO GO

CnR Radiator 2 core aluminum 19x31 roughly - 250
Steering rack - 100
Drive shaft - 200
TRD Rear end housing trussed - 200
TRD Third member 410 gears and Elocker – 500
BFG Baja TA Tires 35x1250x16 - 2000
Bus bar and circuit breakers auto reset ones 15, 20, 25amps – 70 for all with busbar and holder
Glassworks Tacoma bedsides 96-00 - 250
Glassworks supercharger Hood with 4 pins 96-00 - 250
Race Radio Icom – 160 hardly used
PCI intercom for helmets – 340 hardly used
Pumper hoses 4ft, 6ft - 20 each
14” spal radiator fans – 100 each 1250cfm
Spal oil/tranny 8 row cooler with fan - 200
62” 1.5” lift Deavers, ubolts, bushings - 500
11.5” Shackles for long travel springs - 100
Stock shifter - 75
Optima Yellow top battery (2) - 100
Simple light rack with bushings and heim adjustment - 150
3 1” uniballs, just the bearings, no snap rings or cups QSA – 30 each
3.5” poly bumps - 15, never used but were mounted
rear extended brake line for 62's - 15
front extended brake lines - 60 for both
2 dust lights - 20
1 eagle alloy wheel 16x8 - 90
Stock Tacoma Gas pedal - 50
CNC 16” brake pedal - 130
CNC brake master cylinders ¾” and ¾” with remote resivoirs – 80 each
Limit straps – 10 each
¾” Steel heim for steering column - 10
Camburg steering clevis for heimed steering (for ranger, but fit tacoma) - 175

more to come I think......

I want your limit straps too. You have 4 of them, right? Add that to my list of things to pick up.

Sh!t, I hate being broke! http://www.CustomTacos.com/ubbthreads/images/graemlins/mad.gif

ok Kyle....

When did you want to come pick it all up...

I think I'm going to be in the OC area Wednesday night, would that work for you?

should.....call me though to make sure on wednesday day

everyone else, i need this stuff gone, need to get it out of the house...taking up too much space

how long have u had the Optima Yellow top battery, and how far are u from LAX, cuz im going down there on july 1st

can i get pictures of the brake resivor *SP*

hey Eric, i want a yellow top too... PM me condition please bro...

M.

Man! If the Feds hadn't lost my big fat return check I'd be afte the e-locker....by the time they re-issue my check (its looking like august) it will no doubt be gone....

well no one has expressed interest in the third member, so you might be in luck.....lol

bump

Ok so far, the two optimas are sold....thats it....i am going to upload some pics right now...sit tight

what kinda condition are the bedsides in and how big is the buldge? what part of OC are u in.. im in laguna niguel so i could pick them up.

bedsides just got sold about 4 hours ago.....the guy is picking them up tomorrow....if he flakes, i will let you know

any "real" interest from anybody on the 62"s? If you don't sell them fast you can put me down for them.

By any chance, do you have the weld-on spring perches for 4wd?

no i dont have any weld on spring perches.....but i got mine from currie for 15 bucks....no real interest yet....but its only day two....when the time comes and you have money, then hit me up about them....

you got it brotha


bump

Lex, you need the Deavers anyways. Just get them. Either this or pay full pop at Kartek, which isn't as great...

WORD.

I have other things on my platter right now since it's Summer time http://www.CustomTacos.com/ubbthreads/images/graemlins/smile.gif If Eric still has them when I have money..... I'll do it like a virgin on Prom night lol

BTW, sorry for the mini-thread jack (and not to take away from Jason's rear), but there's an 8.8 w/ 4.56 open diff (which you can change) on Race-Dezert for $450 OBO.....and it's closer?

arent those a 5 lug?

I think you are correct. NVM http://www.CustomTacos.com/ubbthreads/images/graemlins/verdict_in.gif http://www.CustomTacos.com/ubbthreads/images/graemlins/looney.gif

siXlugCORE lol

WORD.

I have other things on my platter right now since it's Summer time http://www.CustomTacos.com/ubbthreads/images/graemlins/smile.gif If Eric still has them when I have money..... I'll do it like a virgin on Prom night lol

BTW, sorry for the mini-thread jack (and not to take away from Jason's rear), but there's an 8.8 w/ 4.56 open diff (which you can change) on Race-Dezert for $450 OBO.....and it's closer?


Its a 5 lug. Plus drive shaft it uses to run the Ford rear only works on an ext. cab.

Edit: Just saw you and Eric beat me to it.

hahaha

ok, things sold....and waiting money for

limit straps, motor, tranny, driveline, optimas, lights, light rack, switches, dustlights

CNC brake master cylinders ¾” and ¾” with remote resivoirs – 80 each
can i get the pictures of that
no rush, just wondering

Do you have any pics of the brake lines?

ill get some tomorrow with measurement....

interested in the icom radio, sent you an e mail.

radio is gone to jerry.....

here is what I have left.....

trd axle housing trussed
6 35" bfg bajas
radiator
fans
door shells
door windows
safety air bags
stock sending unit
circuit breakers
fiberglass hood
shifter
cnc brake setup
gas pedal
3.5" bumps
third member
steering rack
.........

Eric you still have the TRD third?

yes I do....410 and e locker with about 20K or so on it.....

How much for the hood and pins?

I want the poly bumps. Did you ever get the King bumps out? Let me know when I can come pick all that [censored] up.

hood ill let go for 175 with pins.....

Kyle, come get them wednesday or after.....i still need to get those off....i have been surfing too much and working too much and not leaving any time for working on the truck....but i need it all gone.....so i will have everything off by the end of this week.....as for the bumps....you can just come over here and take them...(Free)....just get this crap out of here....lol

see guys....throw out some offers......if I think its worth it, then I will hook you up.....ask jerry and andy and kyle.....lol

yeah...thanks again Eric!!!!!!!!!!!!!

What year? Do you have the front grill?

still have the driveshaft? will it will fit my 4x4 xtra cab v6 automatic? how many miles on it?

steering rack mileage?

2000 - no front grill

driveshaft is supposed to go with the tranny and engine if this guy calls me back.....

steering rack has about 30K on it....I got it used from someone else....and I put some miles on it.....

ok, if they guy doesnt call back, i could use the shaft and rack and possibly the radator/fan

ok, but its not the stock radiator and fan.....I have the stock fan, but no radiator.....

i know the rad/fan isnt stock http://www.CustomTacos.com/ubbthreads/images/graemlins/grin.gif

can you tell me a little more about the "Pumper hoses 4ft, 6ft - 20 each"
are those coolant hoses for relocating the radiator to the rear/bed?

does one of the 14” spal radiator fans move enough air or is 2 of them necessary?

thanks for bearing with me

hahaha

the pumper hoses are for a fresh air system to helmets.....

the fans put out 1250 cfm or something like that.....that is a lot, one might do the trick, but I bought two because offroad is very demanding and very hot....so I wanted to keep cool.....

the guy is thinking about coming over tomorrow to get the motor and tranny and driveline...he also mentioned that he wants the radiator and fans if I still have them...but I am not going to just throw those in there for him,....still have to pay off bills....so Ill let you know what happens

yes I do....410 and e locker with about 20K or so on it.....



How much for just the third?

I was thinking about 500.....seems reasonable to me....low miles on it....

some pics of what I still have....

http://i2.photobucket.com/albums/y43/toyotaguy/IMG_1734.jpg
http://i2.photobucket.com/albums/y43/toyotaguy/IMG_1728.jpg
http://i2.photobucket.com/albums/y43/toyotaguy/IMG_1730.jpg
http://i2.photobucket.com/albums/y43/toyotaguy/IMG_1735.jpg
http://i2.photobucket.com/albums/y43/toyotaguy/IMG_1733.jpg
http://i2.photobucket.com/albums/y43/toyotaguy/IMG_1736.jpg
http://i2.photobucket.com/albums/y43/toyotaguy/IMG_1737.jpg


also still have the hood and the 6 - 35" tires, and the hubs, tacoma doors, air bags, windows, gas tank, stock fan,

http://i2.photobucket.com/albums/y43/toyotaguy/IMG_1737.jpg

How much for a lil toe? I'm thinking about suing somebody.....

Bump for ya

How much for the Water Temp and Volts Gauges (shipped to 97068)? Thanks

How much for all the gauges?

Thanks,
Kyle

I was hoping you can post a few pics of the hood and pin set up?

I was looking for about 140 shipped for all the guages, dont really want to separate them.....pics of the hood and the cat converter coming up

did the guy who bought the engine buy the rad and fans?

tranny cooler, guages, intercom are all sold as of this morning......

here are some pics of the cat and the hood

http://i2.photobucket.com/albums/y43/toyotaguy/IMG_1738.jpg
http://i2.photobucket.com/albums/y43/toyotaguy/IMG_1739.jpg

the cat flange looks fried, but I sprayed WD40 on it to break the bolts loose.....

Who bought the gauges? I guess that's what I get for not checking earlier..

the guy buying the motor and trans is coming to pick it up on wednesday....but he is not for sure going to buy it.....if you want them, then send a MO, or come pick them up sooner....its first come first serve....

the guages were sold to the same guy who bought the tranny cooler and intercom.....not on this site....

some pics of what I still have....

http://i2.photobucket.com/albums/y43/toyotaguy/IMG_1733.jpg




I want this "still have these things....first one with money wins.....85 bucks for both shipped....

2 3/4" master cylinders
1 10lb residual valve
1 2lb residual valve
2 remote resevoirs..... "

Let me know.....I would rather have a reverse mount, but I think I can make this work.... Jerry, chime in if I can use these...

Lex, you can have first dibs bud....let me know asap