brucebruce
03-25-2008, 05:05 PM
Ok selling my truck. Got laid off so i need the money for other stuff.
details:
94 Single cab
4x4
22re
5spd
Fiberglass front and rear fenders
31/10.5/15's
Sway-away torsion bars w/ wheel spacers in the front
body as 147K on it
engine has about 25k
Electric fan w/ on/off switch
hi-lift jack
I put a new engbldr street rv head, 261 crawler cam, magnaflow hi-flo cat, jardine exhuast and Doug Thorley headers on.
Its in pretty decent condition. no major dents or anything.
What it needs that i know of is a new idler arm and alignmnet, new tires(these are kinda bald but have maybe 15-20% tread left)
Also i cant seem to get it to pass smog. I dont wanna deal with it anymore. It keeps getting Gross Polluter after i failed the first time because of emissions. IDK what to do to fix it. Maybe its the cat or something to do with the engbldr cam and head. I have the stock head and cam fully assembled in my garage that will go with it. i should have the stock cat too.
The truck runs great. Has a semi rough idle cause of the cam i believe. I just went to long beach and back (2.5-3 hour drive) and it goes to fresno about once i month and i can cruise at 75-85ish most of the time. I just registered it so its good tell feb 09.
I had the truck sold previously to a private party for 3700 but he couldnt take it cause of the smog issue. Im hoping to get 3200obo for it. So help me out please.
Trucks located in Santa Maria, California
you can reach me 805 878 2513, or my email brucebouwmeester@hotmail.com
http://img339.imageshack.us/img339/5967/001ce8.jpg (http://imageshack.us)
http://img339.imageshack.us/img339/151/002ie3.jpg (http://imageshack.us)
details:
94 Single cab
4x4
22re
5spd
Fiberglass front and rear fenders
31/10.5/15's
Sway-away torsion bars w/ wheel spacers in the front
body as 147K on it
engine has about 25k
Electric fan w/ on/off switch
hi-lift jack
I put a new engbldr street rv head, 261 crawler cam, magnaflow hi-flo cat, jardine exhuast and Doug Thorley headers on.
Its in pretty decent condition. no major dents or anything.
What it needs that i know of is a new idler arm and alignmnet, new tires(these are kinda bald but have maybe 15-20% tread left)
Also i cant seem to get it to pass smog. I dont wanna deal with it anymore. It keeps getting Gross Polluter after i failed the first time because of emissions. IDK what to do to fix it. Maybe its the cat or something to do with the engbldr cam and head. I have the stock head and cam fully assembled in my garage that will go with it. i should have the stock cat too.
The truck runs great. Has a semi rough idle cause of the cam i believe. I just went to long beach and back (2.5-3 hour drive) and it goes to fresno about once i month and i can cruise at 75-85ish most of the time. I just registered it so its good tell feb 09.
I had the truck sold previously to a private party for 3700 but he couldnt take it cause of the smog issue. Im hoping to get 3200obo for it. So help me out please.
Trucks located in Santa Maria, California
you can reach me 805 878 2513, or my email brucebouwmeester@hotmail.com
http://img339.imageshack.us/img339/5967/001ce8.jpg (http://imageshack.us)
http://img339.imageshack.us/img339/151/002ie3.jpg (http://imageshack.us)