Toyota Tacoma Forum banner
G

Reaction score
3

Marketplace Rating
(0.0 - 0 reviews)

Profile posts Latest activity Discussions Buy & Sell Reviews About

  • · Registered
    Joined
    ·
    0 Posts
    Hi Gadget - It was recommended I reach out to you regarding a URD Supercharger system that came on a 2009 2.7 Tacoma I recently purchased.

    The Tacoma keeps popping a P2441, Secondary Air Injection System Switching Valve Stuck Closed Bank 1. The truck received a new air pump and valve at the dealership (on their dime, thankfully), but the code is keeps coming back.

    Is there a relay or resister needed for the ECU to stop throwing this code?

    I'm new to the world of Superchargers, so let me know what info or pictures you need for me to best describe how this Supercharger is currently configured, and for us to figure out what it still needs in order to play nice with the ECU.

    Thank you,
    Angie

    · Registered
    Joined
    ·
    4 Posts
    hello.. do you guys carry a patch harness for a 1998 toyota tacoma 2rz
    im going to be wiring up aem to my car and i dont want to cut into my harness

    · Registered
    Joined
    ·
    42 Posts
    Hey g i was wondering if there was a setting or a way on your Mass Air Flow Fuel & Timing Calibrator that can help my truck idle after revving it in neutral?

    · Registered
    Joined
    ·
    0 Posts
    hey gadget i am new here and everyone is telling me to ask you. So here we go i have 3.4 swap in my 89. The problem it has is when you jump in and start it up either first thing in the morning or just after driving it you pull out of the drive way and it dies then i start it right back up and can drive all day without it happening again until i turn it off. Then it does it again.please help thanks so much

    · Registered
    Joined
    ·
    0 Posts
    hello gadget
    im brand new on this forum, and after a two year break im ready to start my project again.

    ok im putting a 5vz into a celica , 3vz has been done already so i know what all it takes to get it in.

    what im working on is sourcing out all the internal performance parts.

    so far I have the block stripped down and I have arias forged pistons from sea2sky tunning

    Things I havent been able to find
    forged rods,
    crankshaft ( how strong is the stock one do I need to get a forged or stroked one)

    cams, ( i read a 262 regrind from webcams is the best way to go) What valves and shims would match them?

    i will be boosting the hell out of this engine, and Im also going to run an aftermarket ecu enginge managemt system to bypass the red line limitations.
    I can be reached best by email nick.boyles@gmail.com. I look forward from hearing from you.
    G

    ·
    Gadget - Super werty said I should contact you about the X1 and availability. I also read there is an X2 coming out but no one seems to know anything about that puppy. My brother-in-law is socal met a guy down there that has an X1 and it looks like he was seduced enough...but he couldn't get one. Is the X2 an X1? And, my bro may need some help installing it in socal some guy mentioned there might be a guy down there that could help him install and tune...

    Bordon

    I might get this puppy as well but maybe he will be my guinne pig ;-)
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top