Yes it does .. I just need a real number so i have something to work with .. If 5 people say yes and i work out a deal and only 2 people step up then im screwed .. I dont want to burn my connections ...
So make a real list people !!! Im trying to help everyone here ..
im 110% on board. i think if we put a non refundable deposit it will keep the people on the fence away, which i think is completely fair. so here the list goes.
its looking like everyone has bailed. im not looking for a sweet deal or anything im just trying to buy these arms without having to buy the whole kit. thanks so much for your help.
just FYI........i got my DJM arms directly from Beefed as a replacement for his prototype camber plates he was attempting to develop. And i have to say i'm not impressed with them. The mounts aren't as wide as the shaft where it bolts to the suspension so there is a bit of gap between the ends of the bushings and the bolts. Mine also make a "thud" noise on the passenger side which i can only think is caused from the earlier statement. As far as alignment.......they are great. I'm at 5" in the front with BJ flip and 2" Belltech coils and have NO abnormal tire wear whatsoever.
I personally would go with custom built arms from a couple of the custom shops out there. Better quality for the money IMHO.
Cando , sadistic , airbagit , chopping block , DJM and a few other places ...
I modify stock arms , i use a K772 screw in balljoint and make the arm a little bit longer for the bagged guys and the trucks with a deep drop ...
those modified ones are hot! how much do you charge to modify them for people? do people just give you their specs and you drop to what ever they need?
Thomas , My truck is set up for road racing . Will those screw in ball joints hold up ? What about poly bushings[ upper / lower ] in the control arms? Turn around on the arms? Thanks John
The stock arms are very strong ,the K772 balljoint is twice as strong as the factory balljoints ,i can install them while im modifying the arms ... Turn around time is one week .
sup guys count me in on those djm arms too! or if u guys are able to modify my existing arms im down with that too! I just need my camber fixed asap im goin thru tires a lot with no more shims on my stock arms therefore I ran out of camber adjustment! any one hit me up and let me know if u can get me a pair too and just let me know who to make the payment
I just sold my used DJM arms .. Im unable to get more ..
I am modifying the factory upper arms adding 1/4" to the arm and correcting the upper balljoint angle a long with using a bigger heavier balljoint ..
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Toyota Tacoma Forum
1.9M posts
61.6K members
Since 2001
A forum community dedicated to Toyota Tacoma owners and enthusiasts. Come join the discussion about performance, modifications, overlanding, lift kits, troubleshooting, maintenance, and more!