Toyota Tacoma Forum banner

350Z springs

5K views 7 replies 4 participants last post by  rcogan86 
#1 · (Edited)
I have a set of front coil OEM 350Z springs for a Tacoma, drops the front your ride about 3" Pay for shipping to your house and the springs are free. Need them out of my garage! Text Mike 505-250-2580 if you want them.0:)
 
#5 ·
this is pretty neat someone figured this out.. i like it
if i wasnt buying bagged parts already, i would take these off your hands

just for people that read this later on in future(if ya dont mind)

they fit right in with no modifications?
stock 350z front springs?
curious if there is a reason you took them out and went with balljoint flip and belltech coils?
 
#6 ·
I looked into this last year, and here are the spring rates:

350Z spring rates
2003-2004: F-314/R-342
2004.5-2008: F-314/R-427
Nismo: F-492/R-336-672(progressive)

2002 Tacoma 2wd 2.4L
F-315

It does drop your ride by about 3", but the spring rate is the same, so you will have 3" less travel on your suspension without it being stiffer.
 
#7 ·
No modification needed to install, OEM 350Z front coil springs.
Removed because I wanted to go lower so I went with B/J flip and cut down Belltech coil springs.
It did ride nice with the 350Z springs, maybe a little softer than stock.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top